Automation Simplified
>> Products > FlexiPanels > Touch Screen Based HMI + Pluggable I/O > Specifications
FlexiPanels Touch Screen Series
Overview | Specifications | Operations | Model Comparison | Dimensions | Device Supported

Specifications

Power  + 24V DC ±15%  
 FP4030MTL0808R  - 10 W Max
 FP4035                - 4 W Max
 FP5043                - 6 W Max
 FP4057                - 10 W Max
 FP5070                - 9 W Max
Bezel  IP66 rated Touch Screen
Operating Temperature  0o to 50oC
Storage Temperature  -20o to 80oC
Humidity  10% to 85% (Non condensing)
Communication Port  One / Two Serial Ports**
 (RS232 / RS422 / RS485 levels supported)
USB Device Port  As programming and monitoring port
USB Host port  Supports USB Memory drive
Ethernet Port  For connecting to a PLC, programming of  FlexiPanels®, a third party device, Drive or  remote monitoring (10 / 100 MBPS).
Type of LCD  Multicolor backlight / TFT Color Touch Screen
Supported Colors  32K for Color TFT LCD
Isolation  Isolation between communication ports, power  and I/O (if applicable) is 500 V DC for 1 Min.
Immunity to ESD  as per IEC61000-4-2
Immunity to Fast Transients  as per IEC61000-4-4
Immunity to Radiated electromagnetic field  as per IEC61000-4-3
Immunity to Conducted disturbances  as per IEC61000-4-6
Surge  as per IEC61000-4-5
Radiated emission  as per EN55011
** One "D" type port that supports RS232 and RS485 levels on different pins. “Y” type cable can be used for separate RS232 and RS485 levels simultaneously.
Digital Inputs

Rated Input Voltage

 Rated Input Voltage
For Normal Input
24 VDC (Max is 28 VDC)
For High Speed
24 VDC (Max is 28 VDC)
 Impedance
4.7 k
2.3 k
Logic '0' Voltage :           0 to 5 V
Logic ‘1' Voltage :           14 to 28 V
Rated Input Current at (24 VDC)
 
For Normal Input
For High Speed
Rated Input Current
4.89 mA
10 mA
Digital Outputs (Open Collector)
Maximum Load current  500 mA NPN or PNP. Short circuit protected
Voltage drop at ON  0.4 V or less
Digital Outputs (Relay)
Relay Rating  230 V AC, 2 Amp. (Max) 5 Amp per common
 
Analog Inputs
Resolution
12-bit
Voltage Mode
Y
Input Range
-10V to +10V
Value of LSB
For 0-10V : 2.44mV
For +/- 10V : 4.88mV
Input Impedance
200KW 
Accuracy at 25°C
0.1% of full scale
Overall accuracy (–25°C to 55°C) % Full Scale
0.3% of full scale
Frequency Limit (-3db)
3.5KHz
Behavior upon sensor failure Input goes to 0, as if no input is connected
Current Mode
Current Mode

Y
Input Range
4mA – 20mA, 0mA - 20mA
Value of LSB
3.906uA
Input Impedance
120W 
Accuracy at 25°C
0.2% of full scale
Overall accuracy (–25°C to 55°C) % Full Scale

0.8% of full scale
Frequency Limit (-3db)
15KHz
Behavior upon sensor failure Input goes to 0, as if no input is connected
Maximum permissible voltage (surge voltage)
between analog inputs
between analog inputs and reference

500V
1000V
Reverse Connection Protection No
 
Analog Outputs
Resolution
12bit
Voltage Mode
Y
Output Range
0 to +10V
Value of LSB
2.44mV/step
Output Load minimum
1000Ώ
Accuracy at 25°C
0.05% of full scale
Overall accuracy (–25°C to 55°C) % Full Scale

±10ppm/°C
Current Mode
Output Range
4mA to 20mA
Value of LSB
3.9umA
Output Load maximum
500Ώ
Accuracy at 25°C
0.13% of full scale
Overall accuracy (–25°C to 55°C) % Full Scale
±10ppm/°C
Current Mode
Output Range
0mA to 20mA
Value of LSB

4.8umA
Output Load
500Ώ
Accuracy at 25°C
0.13% of full scale
Overall accuracy (–25°C to 55°C) % Full Scale ±10ppm/°C
 
Universal Analog Inputs - FPEA-0402U-16
Analog Inputs
Number of inputs 4
Resolution 16 Bit
Input range:
Voltage 0 to 10VDC and 0 to 5VDC
Current 0 to 20mA and 4 to 20mA
Thermocouple J type -210 to 1200°C
K type -200 to 1373°C
mV 0 to 50mV and 0 to 100mV
RTD

(PT100): -200 to 850°C
(PT100): -100 to 457°C
and PT1000: -200 to 850°C

Overall accuracy 1 % of full scale (Max)
Input Impedance 1MΏ for voltage, thermocouple, mV and RTD input
100Ώ for current input (with fuse)
Absolute maximum input ±30VDC, 30mA
Output Type Analog (voltage and current), non-isolated
Number 2
Resolution 16 bit
Output range:
Voltage 0 to 10VDC and 0 to 5VDC
Current 0 to 20mA and 4 to 20mA
Overall accuracy 1% of full scale (Max)
Load 1KΏ (Min) for Voltage and 500Ώ (Max) for current
24V DC Auxiliary Power Supply
Nominal value 24 V DC
Tolerance -15% / +20% according to EN 61131-2
Safety equipment Surge voltage, protection against Reversal polarity
 
High Speed Digital inputs and PWM output -  
FPED-HS-0808N (NPN Type transistor output), FPED-HS-0808P (PNP Type transistor output)
24V DC Digital Inputs
Number of Inputs 8 Inputs Bi-directional Type
(Within which 4 are high speed)
Isolation Optically isolated from internal circuit.
High isolation voltage(BV=3750Vr.m.s.)
Input Impedance 4.9KΏ
Turn OFF time 10msec
Turn ON time 10msec
High Speed Inputs
Number of HS Inputs 4
High Speed Channels X0, X5, X2, X7
Max. input frequency 25KHz
Max. input count 4294967295
24V DC Digital Outputs PNP / NPN Transistor type
Number of Outputs 8 PNP / NPN type
(Within which 2 are high speed outputs)
Nominal Output current per channel 500mA Typical [For HS: FPED-HS-0808N: 300mA
and FPED-HS-0808P: 250mA]
Isolation Optically isolated from internal circuit.
High isolation voltage(BV=3750Vr.m.s.)
Short Circuit protection Auto Protection for 6 normal digital output PNP / NPN type channels.
Nominal load
- Ohmic 48 Ώ / 12 W
- Lamp 12 W
- Inductive 12 VA (1.2 H, 50 W)
Switching frequency with
- Inductive nominal load
0.5 Hz (1.2 H, 50 W), maximum
24V DC Auxiliary Power Supply
Nominal value 24 V DC
Tolerance 15% / +20% according to EN 61131-2
Safety equipment Surge voltage, protection against Reversal polarity
 
FPEA0800LC
Analog Inputs
Number of inputs 8
Resolution 12 Bit
Current Mode:
Input Range: 4 - 20mA and 0 - 20mA
Value of LSB: 3.906uA
Input Impedance 120 Ώ
Accuracy At 25°C : 0.1% of full scale.
Overall accuracy (–25°C to 55°C) :
1% of full scale Max.
Behavior upon sensor failure Input goes to 0, as if no input is connected
 
FPEA0800LV
Analog Inputs
Number of inputs 8
Resolution 12 Bit
Voltage Mode:
Input Range 10V to +10V, 0V to 10V
Value of LSB For 0-10V : 2.44mV
For +/- 10V : 4.88mV
Input Impedance 200 KΏ
Accuracy At 25°C: 0.1% of full scale.
Overall accuracy (–25°C to 55°C) :
1% of full scale Max.
Behavior upon sensor failure Input goes to 0, as if no input is connected

FP4030MT-L08080R
Digital Inputs

Rated Input Voltage

 Rated Input Voltage
For Normal Input
24 VDC (Max is 28 VDC)
For High Speed
24 VDC (Max is 28 VDC)
 Impedance
4.7 k
2 k
Logic '0' Voltage :           0 to 5 V
Logic ‘1' Voltage :           15 to 30 V
Rated Input Current at (24 VDC)
 
For Normal Input
For High Speed
Rated Input Current
4.89 mA
12 mA

High Speed Inputs
Number of HS Inputs 4
High Speed Channels X0, X1, X2, X3
Max. input frequency 100KHz
Max. input count 4294967295
 
Digital Outputs (Open Collector)
Maximum Load current 300 mA NPN or PNP
Voltage drop at ON 0.4 V or less
Isolation Optically isolated from internal circuit.
High isolation voltage(BV=3750Vr.m.s.)
Nominal load
- Ohmic 48 Ώ / 12 W
- Lamp 12 W
- Inductive 12 VA (1.2 H, 50 W)
Digital Outputs (Relay)
Relay Rating  230 V AC, 2 Amp. (Max) 6 Amp per common
Relay Outputs Channels Y0, Y1, Y2, Y3, Y4, Y5
High Speed Outputs
Number of HS Outputs 2
High Speed Channels Y6, Y7
Max. output frequency 100KHz
Max. Load Current 300 mA NPN or PNP
24V DC Auxiliary Power Supply
Nominal value 24 V DC
Tolerance -15% / +20% according to EN 61131-2
Safety equipment Surge voltage, protection against Reversal polarity
Analog Inputs
Number of inputs 2
Resolution 16 Bit
Input range:
Voltage 0 to 10VDC and 0 to 5VDC
Current 0 to 20mA and 4 to 20mA
Thermocouple J type -210 to 1200°C
K type -200 to 1373°C
mV 0 to 50mV and 0 to 100mV
RTD

(PT100): -200 to 850°C
(PT100): -100 to 457°C

Overall accuracy 1 % of full scale (Max)
Input Impedance 1MΏ for voltage, thermocouple, mV and RTD input
100Ώ for current input (with fuse)
Absolute maximum input ±30VDC, 30mA
Analog Output Type (voltage and current), non-isolated
Number 1
Resolution 12 bit
Output range:
Voltage 0 to 10VDC
Current 4 to 20mA
Overall accuracy 1% of full scale (Max)
Load 1KΏ (Min) for Voltage and 500Ώ (Max) for current