Automation Simplified
>> Products > FlexiLogics MicroPLC Series > FL010 > Specifications
FlexiLogics Series Overview
Overview | Specifications | Key Features | Expansion Modules | Dimensions | Drivers Supported
Control Method Stored program cyclic scan system
I/O Processing Batch I/O update(refresh) and Direct I/O access
Expansion I/O Capacity Up to 8 I/O modules,
Local I/O’s - 16 (8 In / 8 Out)
Programming Language Ladder
Program Capacity 8K Steps

Program: Flash Type

Execution Speed 1.03 ms / contact
1.08 ms / coil
1.85 ms / 16-bit transfer
3.28 ms /16-bit signed addition
User Data Timer Registers
Counter Registers
System Registers
Internal Registers
Data Registers
Input Registers
Output Registers
Configuration Registers
Configuration Coils
System Coils
Internal Coils
Timer Coils
Counter Coils
Retentive Registers
256 Words (R/W)
256 Words (R/W)
256 Words (R/W)
256 Words (R/W)
4096 Words (R/W)
400 Words (Max) (R)
400 Words (Max)
1600 Words (Max)
25600 Points (Max)
100 Points (R/W)
4096 Points (R/W)
256 Points
256 Points
1400 Words
Clock-Calendar Year, month, day, hour, minute, second, &
day of the week
Timer 256 timers T0000 to T0255
T0000 to T0060: 10ms
T0061 to T0190: 100ms
T0191 to T0255: 1s
Communication Interface 1 Port of RS232/RS485 on RJ45
1 Port with 2-wire RS 485 on Terminal Block
1 USB Port for Programming and monitoring (Device)
Power Supply DC powered units - 24VDC (+/-15%)
Vibration immunity
Shock immunity
Dimensions (mm)

0 to 55º C (operating), -20 to 85º C (storage)
10 to 90 % non condensing
100mm(H) X 36mm(W) X 70mm(D)
Isolation between communication ports, power
and I/O is 500 V DC for 1 Min.

Immunity to ESD as per IEC61000-4-2
Immunity to Fast Transients as per IEC61000-4-4
Immunity to Radiated electromagnetic field as per IEC61000-4-3
Immunity to Conducted disturbances as per IEC61000-4-6
Surge as per IEC61000-4-5
Radiated emission as per EN55011
Hardware Specifications
Processor 32 bit RISC Processor
Power Supply Input Voltage 24VDC
Tolerance ±15%
Reverse polarity
Communication ports

2 Serial ports COM1 :
RS232/ RS422/RS485 2 and 4 wire.
RJ45 Connector
COM2 :
2 -Wire RS485.
4 pin PBT connector
1 USB Device port For Upload, Download
and monitoring
1 Expansion Connection Slot 8 expansion modules /
64 I/O points
Switches PLC mode Control Switch RUN/HALT
Memory User Application 96KB
Ladder 48KB
Retentive 1400 words
Keep memory Area 1000 words
RTC Type External
Operating temperature
0 to 55º C
Storage temperature
-20 to 85º C
10% to 90% (non condensing)
Approvals CE, UL (Class 1 Div 2), RoHS
Functional Specifications
Communication 2 serial ports COM1 :
2 and 4 wire.
Upload, Download, Monitoring and
Serial communication
COM2 : 2 Wire RS485 2 Wire RS485 Communication
1 USB Device   Upload, Download and Monitoring
Expansion SPI 8 Slots
(All FL Expansions)
Multinode Serial : 32 nodes  
Digital Inputs

Rated Input Voltage

 Rated Input Voltage
For Normal Input
24 VDC (Max is 28 VDC)
For High Speed
24 VDC (Max is 28 VDC)
5.4 k
1.2 k

Logic '0' Voltage : 0 to 3.6 V      Logic ‘1' Voltage : 9.6 to 30 V

Rated Input Current at (24 VDC)

For Normal Input
For High Speed
Rated Input Current
4.2 mA
19 mA
High Speed Inputs
Number of HS Inputs 2
High Speed Channels X0, X1
Max. input frequency 50KHz
Max. input count 4294967295
Digital Outputs (Open Collector)
Maximum Load current 500 mA NPN. Short circuit protected

Digital Outputs (Relay)

Relay Rating
230 V AC, 2 Amp. (Max) 6 Amp per common
Relay Outputs Channels Y2, Y3, Y4, Y5, Y6, Y7
High Speed Outputs
Number of HS Outputs 2
High Speed Channels
Y0, Y1
Max. output frequency
Maximum Load current 500 mA NPN. Short circuit protected
24V DC Auxiliary Power Supply
Nominal value
24 V DC
-15% / +20% according to EN 61131-2
Safety equipment Surge voltage, protection against Reversal polarity